Snow Shovels

Snow Shovel Types And Uses

Types of Snow Shovels And How To Use Them

The winter season is upon us and that means that it is inevitably the time for shoveling snow if you’re one of the unlucky ones without a snow blower. Before you tackle snow shoveling this season, it is important to make sure you have the best snow shovel for the job. A snow shovel is a simple tool to use to remove snow from driveways, walkways, steps, patios, decks and other outdoor areas so that they are clear after the snow falls. Snow shovels are also useful to free your car of snow if it has been snowed in and to keep the areas around your home or business free of snow so that walking and driving is not a hazard.

There are many types of snow shovels to choose from and finding the best type of snow shovel to fit the job and that will be the safest to use without causing injury to your back or other parts of your body is an important step in ensuring that the next snowfall will not be the cause of undue physical injury.

Here is a rundown of different types of snow shovels so you can determine the best snow shovels for you, depending on style, price and ease of use.

Snow Shovel types

electric snow shovelElectric snow shovel

Electric snow shovels or power snow shovels are the easiest way to remove snow without much human-powered effort. An electric or power snow shovel is not as large as a snowblower, but is made to shovel and blow snow so that you don’t have to contend with lots of heavy lifting. One popular model is the Toro snow shovel, known as the Toro Electric Power Shovel, which can clear snow that is up to six inches deep. This popular model retails for around $100, but saves you lots of heavy lifting and potential backaches. There are other models of electric snow shovels for sale as well, and owning one is a luxury because it avoids lots of manual labor after a snowfall.

Aluminum snow shovel

Aluminum snow shovels are among the most popular types of shovels for snow.  They are lightweight and durable, and do not break easily like plastic snow shovels sometimes do. These shovels are less expensive than steel or metal snow shovels but are a good choice for homeowners that only occasionally need to shovel snow.  Aluminum snow shovel prices range from $10 for a basic inexpensive model up to over $100, depending on other features. Most range from $20 – $50.  Aluminum snow shovels are available in many different shapes and sizes.

Steel snow shovel

Similar in style and to aluminum snow shovels, steel snow shovels are a bit heavier and more durable than aluminum models. They are also more expensive. These snow shovels are the perfect solution if you live in areas that receive a decent amount of snowfall or you need to shovel large areas. Many small business owners use a steel snow shovel to clear off the areas outside of their business.

Ergonomic snow shovelErgonomic snow shovel

To ensure that your back is subjected to the least amount of strain possible, ergonomic snow shovels are a good option. These shovels have a bent S-shaped handle which take the strain off of your back when shoveling snow. Ergonomic snow shovels are recommended for anyone shoveling snow that has back problems and are a good option for anyone looking to take some of the strain off of their back muscles when shoveling snow. They are a little more expensive than standard snow shovels but worth the extra few dollars.

Folding snow shovel

If you live or drive in an area that is prone to snow, it is a good idea to keep an auto snow shovel in your car. Since cars have limited space, the best option for an emergency snow shovel for your car is a folding snow shovel. Folding snow shovels are compact and do not take up much room in the trunk of your car but are available for use any time you are out and your car is stuck in the snow and you need to shovel your way out.  Auto snow shovels should be a part of every emergency kit for those that may encounter snow while on the road.

Push snow shovelPush snow shovel

Sometimes lifting snow is not the best solution to snow removal and that’s where push snow shovels come in handy. A snow shovel pusher or a push snow shovel is partially rounded on the bottom and is made to push the snow, rather than lifting the snow up to remove it to another location. Push snow shovels are often used in conjunction with lifting snow shovels to most effectively clear snow and are a good option for light snow falls to easily clear the ground. Pushing the snow also causes less back strain than lifting snow.

Kids snow shovel

Kids love to help out when it comes to shoveling snow or love to just play in the snow with a shovel, but most large snow shovels are just too cumbersome for them to handle.  Kids snow shovels are smaller sized shovels that are made specifically for kids to use. They are often plastic although you can also find aluminum kid snow shovels for sale. A kids plastic snow shovel can be purchased for $10 or less.

Buying a Snow Shovel

When purchasing a snow shovel, it is best to not only consider the style of snow shovel you are looking to purchase, but also to make sure the size of the shovel is one that you can comfortably handle. Some large snow shovels, while allowing for quicker snow removal due to their size, are just too heavy to be used by some people or cannot be lifted if completely filled with snow due to their excessive weight. Wide snow shovels are great for some locations but are not best for narrower areas.  In some cases, a small snow shovel is all that is needed or all that can be comfortably handled.

Another consideration to keep in mind when buying a snow shovel is how comfortable the handle of the shovel is. Different snow shovel handles will be comfortable to different people.  The length and design of the handle are also important to test out prior to purchase in order to make sure the shovel is comfortable to use. It is best to try out moving a snow shovel along the ground and lifting it up and to the side before purchasing it to ensure it is comfortable to use.

A snow shovel is a necessity for anyone that lives in a climate that is prone to snow, but there are many options of snow shovels for sale, depending on how often you need to shovel snow, how much snow you typically need to shovel, how fit or healthy you are, and how much you are willing to spend. Many people have more than one type of snow shovel stored in their garage or shed, either to tackle different types of snowfalls or to allow for multiple people to help shovel the snow after a big snowfall. Most snow shovels are relatively inexpensive and will last through many years of snowfalls.

No matter what type of snow shovel you own, however, it is important to make sure you are healthy enough to shovel snow before tackling the job. Snow shoveling can cause a great deal of physical strain and is the cause of many injuries and health problems and should only be done by those who are physically capable of handling the physical challenges of snow removal.

How To Tune Up A Lawn Mower

How To Tune Up A Lawn Mower

How To Tune Up A Lawn Mower Step by Step

If you’re like most people who have a decent sized yard, you probably own a lawn mower. Whether it’s a standard push mower, riding mower, or zero-turn; you’ll definitely have to maintain it to keep it in good working condition. Though most people aren’t necessarily certified mechanics, there are some basic tune-ups that can be performed by the average person.

Without these tune-ups; repairs are sure to follow. Lawn mower repair can be somewhat expensive, depending on the problem, but with just a few maintenance tricks you’ll be able to keep your mower in tip-top running conditions. Here are a few ways for maintaining or increasing the efficiency of your home mowing machine.

Changing The Oil, Filter, and Spark Plug

This is one of the most basic maintenance tips you can do yourself without having much stress. People are so focused on getting the job done as fast as possible that they tend to forget about adding oil to the mower. Oil is just as important, if not more important than the gasoline you put in it. Without oil your lawn mower’s engine will literally explode.

Make sure you dis-connect your lawn mower battery before ever working on your mower!

First thing you want to do is to loosen the air filter cover, which can be on the top or side depending on what brand you’re using. The cover should drop down and now you can pull the used air filter out. Before putting in the new one is to make sure the pleats/grooves is facing outward. Now just replace the cover and tighten up the cover screws. That’s it!

With a new filter in your mower it’ll run more efficiently because the air filter helps the engine breathe much better. Next tip is to change the oil. Though this may not be the cleanest job in the world, changing the oil is vital and if you don’t do this your engine will become a ticking time bomb. The first thing you want to do is to start the mower and let it run for a few minutes. This warms the oil up which will help it drain better.

Now you need to stop the engine so that you can remove the mower’s drain plug. The engine should be expelling the old oil and if necessary; tilt the mower back or to the side for expelling every drop. It may take a few minutes or so, but afterward you should replace the drain plug, then you should begin filling the mower with fresh, new oil. Last, but not lease; check your oil levels with a dipstick. Some mowers have oil fill holes that allows you visibility for checking oil levels.

Another great way to keep your mower running at full efficiency is to install new spark plugs. With so much commotion going on around you, most people often forget about the spark plugs.

With the engine turned off you should pull off the wire of the spark plug and remove the used plug. Tools needed can be a (deep socket 13/16 inch or 3/4 inch). If you have one, try using a standard spark plug wrench. Next you can hand turn the new spark plug until the threads catch within the grooves. Now you can use the ratchet/wrench to further plug in down, but don’t turn to hard. Turning or cranking down too hard causes most spark plugs to break.

*Tips and Ideas*

  • If the spark plug’s rusted tight, you can spray it with some penetrating lubricant. (WD-40) or (JB80) or (Liquid Wrench)
  • Before trying to loosen the rusted plug, let it soak in the penetrating liquid for about 10 minutes
  • Make sure that there is a gap between the overhanging arm and electrode.
  • Necessary tools for completion are 4-in-1 screw driver or ratchet/socket set

Every Spring you should do this. Tune-ups will extend your engines life, gives you better fuel efficiency, reduces repair costs, and is better for the environment as it reduces emissions as much as 50%. Most people do tune-ups about twice per year so it’s a good idea to buy an extra spark plug, extra air filter, and more engine oil. And keep your mower clean and blades sharp as well. Like the old saying goes:

An Ounce of Prevention Is Better Than A Pound of Cure

Clean lawn mower

How to Clean a Lawn Mower

Lawn mowers are expensive machines that need careful maintenance in order to keep working over a long period of time. Use the steps mentioned below to give your lawn mower a thorough cleaning and help prolong their work life:

Preparation:

Bring the mover out into an open, clean and dry area. Wear old or second hand clothes that won’t be ruined by dirt and grease. Make sure you have all the tools handy such as a hose, buckets, brushes, screwdriver, pliers as well as any spare parts that need to be replaced or cleaned and put back in the mower.

Execution:

1. Unplug the mower from its electrical outlet and drain the fuel out of the machine. Make sure the water does not reach the outlets to avoid short circuits.

2. Use a broom to brush the motor at the start. This won’t remove the hardened grime, but will loosen most of the surface dirt, which can be swept away and disposed of right from the beginning. Use a smaller brush to attend to the inside of the mower from various angles.

3. Use your gloved hand to examine the machine’s crevasses more closely, and brush or rub away the harder sticking dirt clumps with your hand. Your hand will allow you to have a far more intimate understanding of the nature of dirt that surrounds the mower and which needs to be removed.

4. Turn the mower on its side and remove any grass, leaves and other debris that can be found wrapped around the blade.

5. Scrub the visible portions of the machine with a soft brush using soapy water. Take care not to scratch the surfaces by applying too much pressure on the brush.

6. Hose the lawn mower down thoroughly and allow the water to reach the difficult spots inside the machinery that need to be cleaned.

7. Bring out the air filer attached to the machine and give it a thorough cleaning. Make sure you remove all the dust particles by using a blowing machine or using your mouth.

8. Replace the spark plug at regular intervals of using the machine, since it gets worn out quickly.

9. Take out the blade of the mower and get the blades sharpened, since dull blades do not allow the mower to do it’s job properly.

10. Take out the catcher and give it a good hosing to remove leaves and grass particulate.

11. Oil the parts of the machine that need oiling and ensure that the entire system functions smoothly.

Tips:

1. Keep checking the blower and muffler areas of the lawn mower for collecting dirt and grime.

2. Keeping mowers in storage often leaves rodents and other small animals to build nests inside that can cause problems.

3. Perform a quick cleanup for the mower after every cutting session to reduce extra work during extended cleaning sessions.

4. Keep a brush and cleaning cloth close to the place where the mower is stored to encourage future use.

5. Always wait till the engine has cooled down before beginning cleaning operations to avoid getting burnt.

Precautions:

1. Take great care not to cut your hand while cleaning the blades.

2. Make sure the machine is disconnected before cleaning it.

3. Keep track of the smaller parts of the machines and keep them in a box to keep from losing them.

4. Wear old clothes or overalls to avoid getting oil on new clothes.

5. Make sure any cleaning fluids you use do not cause corrosion of the metal.

6. Avoid storing the mower in an open space where it can be attacked by the harsh forces of nature.

how to sharpen a reel mower

How to Sharpen a Reel Mower

How to Sharpen a Reel Mower

Reel mowers are as eco-friendly as they can get, but the blades can still get dull. So knowing how to sharpen a reel mower if you have one can be a really smart skill to have. They are better than their gas-powered counterparts that pollute the environment, and you get some exercise too. Additionally, they are small, easier to store and need very little maintenance.

However, mowing a lawn with a reel mower can become a strenuous task after some time. Over time, pebbles or rocks rub against the blades, due to which they wear out and become dull. Though reel mowers need to be rarely sharpened, they must get their regular sharpening so that you can mow a lawn with minimum strain to your body and the unit.

Now, there are many ways to sharpen a reel mower, with each technique having its advantages and disadvantages. Here are some techniques that you can explore to sharpen you reel mover.

Back Lapping Technique

The back lapping technique is the most efficient and safest way of sharpening a reel mower. To implement this technique, you will need to buy a back lapping sharpening kit.

This kit consists of a crank to turn the blades and a lapping compound which is nothing but an abrasive mixed in a thick goo. Once you have the kit, you are ready to start “back lapping”.

Step 1: Remove The Wheel And Gear

Place the reel mower on a work bench and stand behind the mower. Remove the side cover of the left wheel with a screw driver when standing behind the mower. This reveals a ring, nut or a pin that holds the wheel to the mower. Remove this attaching mechanism with a flat head screwdriver, and take the wheel off and keep it aside. Remove the gear that is now visible.

Step 2: Prepare The Mower For Cranking The Blades

Once the gear has been removed, you will see the shaft that runs the blades. Use the crank from the sharpening kit and attach it to the metal shaft. At this stage you would want to adjust the blades so that they are uniformly in contact with the bed knife.

Step 3: Apply Lapping Compound And Start Cranking

Use a small paint brush to apply an even thin layer of lapping compound on all the five blade edges. Use the crank to move the blades in a backward direction. Doing this causes the lapping compound to sharpen the blade edges.

Crank the blades for about ten minutes and reapply the lapping compound if needed. Continue to crank till you see a flat shiny surface at the edge of all the blades. You may get tired while doing this, so take frequent breaks. You can also use a powered drill instead of a crank to save time and energy. Make sure that the drill is on low and running backwards.

Once the shiny edges are visible on the blades, clean the compound and check for any area that is left out and that needs some more lapping compound and cranking. Repeat the process until you are satisfied.

Step 4: Readjust The Blades And Reassemble

If you are satisfied with the sharpness of the blades, readjust the blades such that they are marginally away from the bed knife.Test the sharpness of the blades by mowing a piece of paper and adjust the bed knife until it does this successfully. Next, attach the gear and the wheel back to the mower. Don’t forget to grease the components if they need it, while attaching it back.

Manual Sharpening

This technique involves the use of a sharpening file, metal finishing sandpaper or an angle grinder that you would generally use for sharpening knives. First, disable the machine, and make sure that the blades don’t rotate if they are not detachable. Some mowers have gears to lock the wheel preventing it from rotating. If this mechanism is not present, use wooden blocks to jam the blades and prevent them from moving.

Once the mower is safe to work on, rub the tool of your choice against the angle of the blades around seven or eight times to sharpen them to the desired sharpness. Use gloves to protect your fingers and knuckles while doing this. Alternately, the sandpaper can be attached to the bed knife and the blades can be rotated backwards, causing the sandpaper to sharpen the blades. After sharpening, apply a coat of vegetable oil to the blades to prevent it from rusting and to increase its lifespan.

Manual knife sharpeners are risky compared to the back lapping technique. There is always a possibility of ruining the blades with over grinding and you may also hurt your fingers.

To summarize, use the technique that you feel is simpler and that suits your needs. Follow safety procedures and protect your fingers and hands from potential accidents. Maintain your reel mower and keep the blades sharp to enjoy mowing your lawn.

How To Fix A Smoking Lawn Mower

How To Fix A Smoking Lawn Mower

How To Fix A Smoking Lawn Mower

Lawn mowers are one of those pieces of equipment that are a great return on investment. Meaning that the amount you spend for the mower will end of saving you money down the line because you won’t have to pay a landscaper every month. This type of equipment is one of the most common products found in mostly everyone’s home. The importance in this piece of equipment can’t be denied and is worth it’s weight in gold, unfortunately this device is prone to breakdowns depending mostly by how individuals use it.

Smoke is a common and a sure sign that something in the engine isn’t working properly. Yes, it may look very bad seeing your motor smoke, but it really isn’t a very serious issue most of the time.

But if you ignore the signs and leave the engine untreated, it will definitely become a big issue that will end up costing you money on repairs. There are different types of smoke and this article is written to help you recognize and control the issues at hand.

 

 

Black Smoke

This type or color of smoke usually caused by with the mower’s fuel system or carburetor. One of the most common causes is that there is an unequal balance of fuel and air in the lawn mower’s system. Too much gasoline isn’t a problem for most people but it actually floods the engine in this case.

Some probable causes can be from a dirty carburetor that needs some cleaning and tuning or the air filter is too clogged up. The first and easiest thing to do is by checking the air filter. A high percentage of this very issues is generally from dirty air filters.

All you have to do is remove the mower’s air filter and clean. Some people do this by using their mouths and blowing or if you have an air compressor, use it for a more thorough cleaning. If your air filter is clogged then the best thing to do is to remove and replace it with a new one. Clogged air filters are extremely hard to fully clean so replacing it is the way to go.

After doing this action try starting the engine to see if the problem is fixed. If your mower’s engine is still producing black smoke then you need to adjust the carburetor. This step will produce a more balanced air-to-fuel mixture. This really isn’t too hard and can be done done twisting a screw.

Depending on you make and model, you should take a look at your owners manual for complete information, but if this doesn’t work you definitely should have it professionally repaired.

White or Blue-White Smoke

Unlike black smoke that is caused by the unbalanced burning of more fuel to air; white smoke signifies the burning of excess oil. Yes, having too much oil is a bad thing as with too much gas. Many times with this issue is that you can start the engine and just let the mower run for a while. This is effective for burning off too much oil.

Leaked oil can be a result of the mower being turned over or tilted to one side causing it to leak fluids. Every engine has it’s own tolerances, but don’t turn the engine off because this action further delays the issue.

Over filling the oil reservoir will result in your mower’s engine producing white smoke so just closely monitor the amount of oil or fuel you put into the engine. If this isn’t the case and the smoking persists, you can have a more in-depth issue with the crankcase. Check the crankcase for any leaks and if there is too much air in the crankcase, the mower’s breather won’t be able to handle it.

Unfortunately if you can’t detect any air leaks; the best thing to do is take your mower in for professional service. In addition to these issues any worn out rings or cylinders, blown head gaskets, or an ineffective breather will produce white smoke. These issues require a skilled mechanic for service.

Smoke is usually a precursor to an issue and not necessarily the issue itself. Always closely monitor the amounts of gas and oil fluids put into the engine and try to keep the mower sitting on a balanced level ground.

How to Clean a Lawn Mower Carburetor

How to Clean a Lawn Mower Carburetor

A lawn mower is an expensive piece of machinery that requires regular cleaning and maintenance. The lawn mower’s carburetor is one the machine’s most important parts that needs to be cleaned carefully to ensure its long use. The following steps should be kept in while cleaning your carburetor.

Planning:

Carefully take out the carburetor and check to see if it has any defects or problems that prevent its smooth operation. Assemble the kit you will need for cleaning the carburetor, which should include a vice grip, socket wrenches, screw drivers, cleaning rags, cleaning wire, a wire brush, pipe cleaners, cleaning solution and any parts that need to be replaced.

Execution:

1. Start with turning off the mower and bringing it out into an open space where the cleaning operation will not cause other articles around the house to get dirty.

2. Pull the spark plug boot off and disconnect the plug, or disconnect the battery if there is one. Shut off the fuel line that is connected to the spark plug by tying the line or pinching it shut using the vice grip or clamps.

3. The fuel line needs to be disconnected from the nozzle of the carburetor by pulling the flexible hose off.

4. Separate the air filter from the carburetor. If the filter has been placed inside a case, use a screw driver or wrench to open the casing and remove the filters.

5. Unbolt the screws connecting the carburetor to the manifold using the screwdriver. Be sure to disengage the linkages, which is wire connected to the spring which is used to engage the throttle.

6. Remove the bowl at the bottom of the carburetor after unbolting the bolt at the bottom. Use an aerosol carburetor sprayed onto a clean rag to clean the visible parts. Take out the O-ring and inspect it to see if it contains cracks or needs to be replaced.

7. Turn the carburetor on its head and remove the hinge stuck to the carburetor using a pin and put it aside. A screwdriver can be used to gently tap the hinge pin loose and pull it out without damaging it. The needle, pin and the float all need to be cleaned using the carburetor cleaner before being set aside.

8. Examine the inside of the cleaner to check for stray debris parts and spray a large amount of cleaner inside the walls of the carburetor. Allow the walls to sit for a few minutes with the solvent still operating inside.

9. Use the steel wire in order to scrub the pipes and openings clean, including the fuel jet devices residing inside the carburetor.

10. Scrub away the ash and soot deposits from the rest of the carburetor and clean out the parts using a cleaning rag dipped in cleaning solutions.

11. Wipe the parts that have been cleaned with a rag. Rinse out the carburetor parts one last time before reassembling the individual pieces. Finally, connect the spark plug boot back into the spark plug.

12. Repeat the process at regular intervals over time to prolong the life of the carburetor.

Some Useful Tips:

1. Use a workbench while cleaning the carburetor to keep track of the various parts and a hassle free assembling and disassembling of the device.

2. The air filters inside the carburetor come in many shapes and sizes, and can be found inside a casing or attached to the side of the carburetor. Keep the setting in mind and clean the filters accordingly.

3. Submerge the parts of the carburetor in cleaning solution for an hour or more in order to remove the more strongly sticking dirt and grime particles for the parts.

4. A spray cleaner can also be used for the operation, which removes the need for a cleaning solution and can be hosed off using regular water.

5. Clean up kits are available for carburetors which are used to provide an annual tune up that helps prolong the machine’s work life.

Precautions:

1. Make sure the mower is turned off and not connected to an electrical outlet before beginning cleaning operations.

2. Use gloves, aprons and other protective gear while cleaning the carburetor to avoid damaging your hands against the hard and sharpened parts of the device and to prevent dirt, oil and grease from sticking to your skin.

3. While disassembling the mower, make sure the smaller parts are kept together in a box to avoid losing track of them.

4. Remember the proper assembly of the various parts while reassembling the mower in order to put the machine back the right way.

5. Use the proper tools while handling the smaller parts of the carburetor to avoid damaging or breaking the parts.

6. After turning off the engine, wait for it to cool down before starting work on the carburetor.

How to Charge a Lawn Mower Battery

How to Charge a Lawn Mower Battery

A lawn mower’s battery is its lifeline. However, batteries discharge easily and have to be maintained and charged frequently. Some lawn mowers have a mechanism to charge the battery when it is being used, whereas others die out with frequent use or due to being idle for a long time.

A discharged battery can cause permanent damage to itself, making it unusable. So to avoid incurring additional costs of replacing the battery, and to increase its life, charging the battery regularly is important. Here is a guide to help you do this in the best way possible.

Step 1: Choose The Right Tools And The Right Location

Acquire the tools needed to charge the battery, such as pliers, crescent wrench and a battery charger. Keep these tools in close proximity before you start charging the battery.

Along with the right tools, choose a safe location to charge the battery. Since the battery may emit harmful gases during the charging process, choose a location that is well ventilated and free of any ignition sources. Make sure that you are close to an electrical outlet and away from obstructions such as water, dirt or contaminants. Clear off any objects or wires that may get entangled and that can cause trip hazards.

Step 2: Locate And Remove The Battery From The Mower

Start by locating the battery. The majority of mowers have the battery placed under the seat or hood. If it is not found in these places, use the owner’s manual to locate it. On locating the battery, remove it from the lawn mower.

The tools that you will need depend on the style and make of your lawn mower. Some mowers have a battery compartment which has to be unscrewed using a screwdriver, whereas others simply have a strap or lever that keeps it in place with a release button.

First, disconnect the battery connections. If the battery has insulated chips to hold the cables in place, use pliers to remove them, whereas if bolts are used, use a wrench to loosen them and disconnect the cables from the battery terminals.

Make sure to first remove the negative terminal cable, followed by the positive terminal cable, to avoid any electric shock. Release the strap or lever to carefully remove the battery from the mower, and place it on a flat surface close to an electrical outlet.

Step 3: Connect The Charger To The Battery Terminals

The type of charger you use depends on the make and voltage of the battery. Many lawn mower manufacturers provide a battery charger along with the battery. Simply use the one that you got with your mower, or, if you haven’t received one, buy one from the local market or the manufacturers.

First, identify the voltage of the battery, from the information label. Most 24-volt batteries have a unique manufacturer designed charger, and only this can be used to charge the battery. For 6 and 12-volt batteries, appropriate self-charging chargers are available in the market. So check the voltage of the charger before purchasing one. Chargers that have a voltage adjuster can also be used.

On acquiring an appropriate charger, attach the red clamp of the charger to the positive terminal of the battery and the black clamp to the negative terminal. Ensure that the charger is not connected to the power supply yet. If you are using a charger with a voltage adjuster, adjust it to the voltage of the battery. Connect the charger to a power supply and switch it on to start charging the battery.

If the reading on the charge meter is zero, it means that the battery is fully charged. If the battery has LED lights, a red light flashes and switches to a flashing green to indicate that charging has begun. It turns to solid green to indicate that the battery is fully charged. Usually, batteries take 4 to 8 hours to charge completely. However, don’t charge the battery beyond 8 hours, as this can damage the battery or cause it to explode.

Step 4: Unplug The Charger And Reconnect The Battery

Once the battery is charged, unplug the charger from the power source. Disconnect the clamps from the battery and place the battery in its original location in the mower. Connect the battery cables back to their original points on the battery. Secure the bolts and the strap or lever to keep the battery in place. Finally, start your lawn mower to test out the battery.

To summarize, use the right tools, the right charger and the right location to charge your lawn mower’s battery. Follow manufacturer’s instructions and safety tips, while you regularly charge the battery to increase its life span. A healthy battery equates to a healthy lawn mower, which in turn results in a healthy lawn.